Water Recycling

Where a washing plant for waste products or natural materials is in operation, the resultant wastewater is traditionally sent to settling ponds or lagoons however this is not the most efficient or sustainable option.

CDE’s AquaCycle™ thickener technology recycles up to 90% of process water for immediate reuse in the system. CDE provides a cleaner, more environmentally friendly solution designed with minimal footprint.

The customer-focused solution incorporates a patented integrated FlocStation and unique rake mechanisms for optimal sludge conditioning. The AquaCycle™ thickener also has unmatched maintenance access.

However, by introducing CDE’s water recycling equipment, you can:

• Reduce the space required to accommodate your settling ponds
• Minimize the environmental impact of your operations
• Significantly reduce health & safety risks to on-site personnel

 Where there is an issue with water availability which means a wet processing plant is not possible, introducing CDE’s AquaCycle™ can allow your plans for a new plant to proceed as a result of the significant reduction in the volume of fresh water required to feed your washing plant.

CDE’s water recycling solution separates the suspended solids from your hydrocyclone overflow. This is assisted with the addition of a flocculent.

This causes the minus 63 micron / 200 mesh particles to form a chain and sink to the bottom of the AquaCycle thickener tank while the clean water overflows a peripheral weir and is recirculated to your washing plant.

The settled sludge is then pumped away from the AquaCycle thickener to an on-site storage area. It is possible to eliminate the requirement for settling ponds through the introduction of Filter Press technology which accepts the settled sludge from the AquaCycle thickener and presses it to a dry filter cake with +80% dry solids content.